Department of Civil, Environmental and Sustainable Engineering

Professor Emeritus: E. John Finnemore

Associate Professor Emeritus: Steven C. Chiesa

Professors: Aria Amirbahman, Ed Maurer (Robert W. Peters Professor and Department Chair), Reynaud Serrette, Sukhmander Singh (Wilmot J. Nicholson Family Professor)

Associate Professors: Rong He, Hisham Said

Senior Lecturer: Tonya Nilsson

Lecturers: Tracy Abbott, Laura Doyle

Civil engineers are responsible for planning, designing, building, maintaining, and rehabilitating the complex interrelated technological, social, and environmental dimension of the infrastructure systems on which modern society relies. To meet these challenges, the Department of Civil, Environmental and Sustainable Engineering offers a well-balanced undergraduate program that develops graduates capable of solving complex problems with fixed and often limited resources. The application of state-of-the-art skills, a sound understanding of engineering principles, concepts of sustainability and resilience in design, the ability to communicate and articulate ideas, and preparation for lifelong learning are some of the key areas of focus in the civil, environmental and sustainable engineering curriculum. At the completion of the undergraduate program, graduates are well equipped to enter the practice or pursue advanced studies in any of the civil engineering disciplines. The department provides students with the necessary guidance to develop their full potential within the context of their own personal experiences, the expectations of the profession, and societal needs. Our graduates become civil engineers with primary responsibility for planning, designing, constructing, operating, and maintaining infrastructure critical to public welfare, safety, and the expectations of daily life---including buildings, transportation systems, airports, irrigation systems, water supplies, supply systems, and environmental protection facilities.

The Department of Civil, Environmental and Sustainable Engineering works with its advisory board and other key constituencies to produce the program's educational objectives shown below. Specifically, the department has committed itself to providing a program that produces graduates who, within five years of graduation, are:

Capable of designing, building, maintaining, or improving civil infrastructure systems in the context of environmental, economic, and societal requirements
Serving the community as ethical and responsible professionals
Engaging in lifelong learning for professional growth

Requirements for the Major in Civil Engineering

In addition to fulfilling the undergraduate Core Curriculum requirements for the bachelor of science degree in Civil Engineering, students must complete a minimum of 195 units and the following department requirements:

English

ENGL 181

Mathematics and Natural Science

MATH 11, 12, 13, 14
AMTH 106 (or MATH 22) and AMTH 112 (or AMTH 108)
CHEM 11 or CHEM 11T
PHYS 31, 32, 33
CENG 20, 20L

Engineering

ENGR 1, 1L
ELEN 49 (or ELEN 50, 50L)
CENG 7, 7L, 10, 10L, 15, 41, 44A, 44AL, 44B, 115, 115L, 121A, 121AL, 121B, 125, 125L, 128, 132, 140, 140L, 141, 141L, 143, 143L, 145, 148, 148L, 192A, 192B, 192C, 193, 194, and either 160 or 182

Electives

Four technical electives from those listed below, with at least two design-focused electives and at least one analysis-focused elective:
- Design-focused electives: CENG 119, 133, 134, 135 & 135L, 136, 137, 138, 142, 144 & 144L, 146, 147, 150
- Analysis-focused electives: CENG 118, 122, 123 & 123L, 124, 139, 149, 151, 160, 161, 162, 163, 182, 184, 186, 187
One free elective (4 units)

The technical electives should be selected in consultation with an academic advisor to satisfy the requirements of the general civil, environmental and sustainable engineering program or one of the approved emphasis area programs in civil engineering. The program requires that students take either CENG 160 or CENG 182; whichever course is not taken to satisfy this requirement may be taken as a technical elective.

Combined Bachelor of Science and Master of Science Program

The Department of Civil, Environmental and Sustainable Engineering offers a combined degree program leading to a bachelor of science and a master of science. Under the combined degree program, an undergraduate student begins taking courses required for a master's degree before completing the requirements for a bachelor's degree and typically completes the requirements for a master of science in civil engineering within a year of completing the bachelor's degree.

Undergraduate students admitted to the combined degree program are required to enroll in the program between February of their junior year and December of their senior year. Students in this program will receive their bachelor's degree after satisfying the standard undergraduate degree requirements. To earn a master's degree, students must fulfill all requirements for the degree, including the completion of 46 units of coursework beyond that applied to the bachelor's degree. The program of studies for the master's degree may include up to 20 units taken while enrolled as an undergraduate student; however, no individual course can be used to satisfy requirements for both the bachelor's degree and master's degree.

Requirements for the Minor in Construction Management

All undergraduates are eligible to apply for the Construction Management minor. Students intending to earn this minor must seek advice from the Civil, Environmental, and Sustainable Engineering (CESE) Department. Students must take all the required courses, and 6 units from the list of elective courses. The required and elective courses should add up to at least 22 units. Students may "double-dip" up to 14 units of coursework to concurrently satisfy a Major degree or university core requirements.

Required Courses

CENG 7, 7L, 45, 45L, 118, 185, and 186

Mechanical engineering students can satisfy the CENG 7 & 7L requirement with MECH 10 & 10L.

Civil engineering majors can satisfy the CENG 45 & 45L requirement with CENG 115 & 115L.

Elective Courses

CENG 119, 182, 183, 184, 187, 188, 189, FNCE 118, FNCE 129, ENVS 128

Civil, Environmental and Sustainable Engineering Laboratories

The Concrete Testing Laboratory contains facilities for mixing, casting, curing, and testing concrete cylinders and constructing reinforced-concrete test specimens.

The Environmental Laboratory is equipped with instrumentation needed for basic chemical and biological characterization of water, wastewater, and air samples as well as several pilot-scale treatment systems.

The Geology Laboratory is equipped with extensive rock and mineral samples as well as topographic, geologic, and soil maps.

The Hydraulics Laboratory is shared with the Department of Mechanical Engineering and contains fluid flow and pumping demonstration equipment and a tilting flume that can be fitted with various open-channel fixtures.

The Simulation and Design Laboratory maintains Windows-based personal computers (PCs) that are used in course assignments and design projects. Commercial software packages in all the major areas of civil engineering are available on the systems with user documentation available to students.

The Soil Mechanics Laboratory contains equipment for testing soils in shear, consolidation, and compaction; equipment for other physical and chemical tests; field testing and sampling equipment; and a complete cyclic triaxial testing system with computer controls used for both research and instructional purposes.

The offsite Structural Laboratory Annex is a high-bay test facility equipped with a closed-loop hydraulic system, modern data acquisition and control systems, and extensive instrumentation capability. The Annex has the ability to test unique building components that incorporate walls/frames and floor systems with heights up to 8.0 meters.

The Structures and Materials Testing Laboratory is equipped with three universal testing machines and a high-bay structural test system. These machines/systems are used for testing a variety of construction materials and assemblies under quasi-static and pseudo-dynamic loading. Complementing this equipment are a series of digital and analog instruments, and high-speed data acquisition and control systems.

The Surveying Laboratory has a wide variety of equipment, including automatic levels, digital theodolites, total stations, and GPS-based surveying instruments available for instructional purposes.

Lower-Division Courses

7. Graphic Communication

Introduction to technical drawing including isometric and multiview drawings, use of sectional views and dimensioning, understanding blueprints and scales. Corequisite: CENG 7L. (3 units)

7L. Graphic Communication Laboratory

Freehand drawing, manual and computer-aided drafting of physical models, construction of models from drawings. Corequisite: CENG 7. (1 unit)

10. Surveying

The use and care of survey instruments. Principles of topographic mapping, linear measurements, leveling, traverses, curves, boundary, and public surveys. Corequisite: CENG 10L. (3 units)

10L. Surveying Laboratory

Field work using common surveying instrumentation and equipment. Corequisite: CENG 10. (1 unit)

15. Computer Applications in Civil Engineering

Solution techniques for civil engineering problems using common software and programming languages. Introduction to matrix analysis, graphical and numerical solution methods, regression analysis, and linear optimization using spreadsheets, basic programming, and math analysis programs. Students must complete a paper and presentation on a topic developed with analytical tools used in the course. (3 units)

20. Geology

Development and formation of geologic materials. Significance of structure, landform, erosion, deposition. Stream and shoreline processes. Surface water. Corequisite: CENG 20L. (3 units)

20L. Geology Laboratory

Identification, examination, and characterization of rock specimens. Corequisite: CENG 20. (1 unit)

41. Mechanics I: Statics

Resolution and composition of force systems and equilibrium of force systems acting on structures and mechanisms. Distributed forces. Friction. Moments of inertia. Prerequisite: PHYS 31. (4 units)

43. Mechanics II: Strength of Materials

Analysis of stresses and strains in machines and structural members. Fundamental study of the behavior and response of statically determinate and indeterminate structural members subjected to axial, torsional, flexural, shear, and combined stresses. Introduction to the stability of columns. Prerequisite: CENG 41. Corequisite: CENG 43L. (4 units)

43L. Mechanics II: Strength of Materials Laboratory

Testing of structural elements subjected to axial tension and compression loads, bending, torsion, and combined loading. Analysis of test data and laboratory report writing. Corequisite: CENG 43. (1 unit)

44A. Strength of Materials I

Stress-strain relationships for structural elements subjected to axial, torsional, flexural, shear, and combined loading. Fundamental study of the behavior and response of deformable, statically determinate structural systems. Stress and strain transformations and analysis using Mohr's circle. Prerequisite: CENG 41. Corequisite: CENG 44AL. (3 units)

44AL. Strength of Materials I Lab

44B. Strength of Materials II

Continuation of topics covered in CENG 44A. Shear flow and shear center. Indeterminate systems. Introduction to plastic behavior and column stability. Prerequisite: CENG 44A. (2 units)

45. Construction Materials

Exploration of the various materials used and applied in the building construction process. The characteristics, specifications, and applications of basic construction materials such as soil, concrete, wood, steel, and bituminous products. Includes presentation, discussion, and analysis of conventional and non-conventional construction materials along with their sustainability implications. Civil Engineering students can not enroll in this course and should enroll in CENG 115. (2 units)

45L. Construction Materials Laboratory

Laboratory testing and processing of steel, concrete, wood, and other non-conventional civil engineering construction materials. Corequisite: CENG 45. (1 unit)

Upper-Division Courses

115. Civil Engineering Materials

Review of the structure and properties, production processes, and experimental methods used for determining key properties of common civil engineering materials with a focus on steel, concrete, and wood. Non-conventional building materials and their applications are studied along with sustainability implications of any material choice. Prerequisites: CHEM 11 or equivalent and CENG 44A. Corequisite: CENG 115L. (4 units)

115L. Civil Engineering Materials Laboratory

Laboratory testing of steel, concrete, wood, and other non-conventional civil engineering construction materials. Corequisite: CENG 115. (1 unit)

118. Introduction to Construction Management

Introduction to construction roles and responsibilities, construction project phases, building systems, bidding and cost estimating, building trades and subcontractors, construction methods, and safety and quality management. Also listed as CENG 218. Prerequisite: Junior standing. (3 units)

119. Design for Sustainable Construction

Design strategies for sustainable commercial and residential construction. Use of LEED criteria for assessing sustainable construction. Team-based project planning, design, and construction. Economic evaluation of sustainable technologies. Prefabrication. Overall project management. Also listed as CENG 219. Prerequisite: junior standing. (3 units)

121A. Geotechnical Engineering

Origin, development, and properties of soils. Classification of soils and applications of engineering mechanics to soils as an engineering material. Water in soils. Soil-testing methods. Compaction, stabilization, consolidation, shear strength, and slope stability. Prerequisites: CENG 20 and 44A. Corequisite: CENG 121AL. (3 units)

121AL. Geotechnical Engineering Laboratory

Application of soil testing methods. Corequisite: CENG 121A. (1 unit)

121B. Geotechnical Engineering Design I

Theory and basic factors related to earth pressure, slope stability, and foundations. Prerequisite: CENG 121A. (2 units)

NEW: 122. Air Pollution

The study of generation of common air pollutants, their transport, effects, and state-of-the-art air pollution control strategies. Also listed as CENG 252. Prerequisite: CENG 143 or consent of the instructor. (3 units)

123. Pollutant Fate and Transport

Study of reaction energetics, kinetics, interphase mass transfer, and partitioning as they relate to pollutant transformation in the environment. Application to surface waters and groundwater. Also listed as CENG 253. Prerequisites: CHEM 11 or CHEM 11T or equivalent, CENG 143, AMTH 106, and junior standing, or instructor's consent. Corequisite: CENG 123L. (3 units)

123L. Pollutant Fate and Transport Laboratory

Use of experimentation and computer modeling to analyze problems in chemical kinetics, pollutant transport, and phase partitioning. Also listed as CENG 253L. Corequisite: CENG 123. (1 unit)

124. Water Law and Policy

Introduction to the legal and regulatory concepts related to water. Examines rights, policies, and laws, including issues related to water supply and access (water transfers/water markets, riparian and appropriative doctrines), flood control, water pollution and quality (the Clean Water Act, EPA standards, stream flows for fish), and on-site stormwater management/flood control. A focus on California water law and policy is complemented with some national and international case studies. Also listed as CENG 258 and ENVS 124. (4 units)

125. Municipal Engineering Design

Various aspects of civil engineering as applied in municipal (public works) design practice. Maps and plats; site layout and earthworks; drainage; streets and utilities. Prerequisites: CENG 7 and 10. Corequisite: CENG 125L. (3 units)

125L. Municipal Engineering Design Laboratory

Development of CAD drawings for a design project. Corequisite: CENG 125. (1 unit)

128. Engineering Project Management

Time value of money, economic analysis of engineering projects, rate-of-return analysis, cash-flow analysis, depreciation, project management, planning and capital budgeting, scheduling, preliminary cost estimates, risk analysis, financial analysis. Prerequisite: junior standing. (3 units)

132. Structural Analysis

Distribution of loads in structural systems. Analysis of statically determinate and indeterminate beams, trusses, and frames. Influence lines for beams and trusses. Introduction to structural modeling, and elastic analysis using commercial software programs. Prerequisite: CENG 44A. Corequisite: CENG 44B. (4 units)

133. Wood Design

Design of wood structural systems. Design of sawn and structural composite lumber members for tension, compression, bending, and shear. Introduction to shear wall and diaphragm design. Design of connections. Also listed as CENG 233. Prerequisite: CENG 132. (4 units)

134. Structural Steel Design I

Design of structural steel buildings. Design of steel members for tension, flexure, shear, compression, and combined loading. Design of composite floor beams. Introduction to connection design. Prerequisite: CENG 148. (4 units)

135. Reinforced Concrete Design

Design of one-way slabs, tee beams, and doubly-reinforced beams for flexure and shear; moment coefficient method; deflection estimates; longitudinal bar cutoffs and detailing; biaxial bending and slender columns. Prerequisite: CENG 148. Corequisite: CENG 135L. (4 units)

135L. Reinforced Concrete Laboratory

Experimental tests of reinforced concrete building components; problem solving and review sessions; field trip(s). Corequisite: CENG 135. (1 unit)

136. Advanced Concrete Structures

Confinement, moment-curvature and shear-displacement response; modeling; design and detailing of special moment frames, shear walls, and diaphragms; prestressed concrete beams. Also listed as CENG 236. Prerequisite: CENG 135. (4 units)

137. Earthquake Engineering Design

Introduction to seismic sources, wave propagation, and effects on structures. Spectral representations of demands. Design according to current code provisions and using simplified pushover methods. Also listed as CENG 237. Prerequisite: CENG 148. (4 units)

138. Geotechnical Engineering Design II

Foundation exploration; bearing capacity and settlement analysis; spread foundations; piles and caissons; earth-retaining structures; loads on underground conduits; subsurface construction. Also listed as CENG 238. Prerequisites: CENG 121A and 121B. Corequisite: CENG 138L. (4 units)

138L. Geotechnical Engineering Design Laboratory

Structural design of footings, piles, and retaining walls. Also listed as CENG 238L. Prerequisite: CENG 148. Corequisite: CENG 138. (1 unit)

139. Groundwater Hydrology

Groundwater occurrence, flow principles, flow to wells, and regional flow. Groundwater contamination, management, and modeling. Field methods. Field trips. Also listed as CENG 259. Prerequisite: CENG 141 or permission of instructor. (3 units)

140. Water Resources Engineering

Concepts, analysis, and engineering design related to water resources: hydrologic cycle, evaporation, infiltration, precipitation, snow, flood frequency, water supply, and runoff management. Impacts of development, land use, and climate changes on water supply, and the importance of these changes to society. Prerequisite: CENG 141 or permission of instructor. Corequisite: CENG 140L. (4 units)

140L. Water Resources Engineering Laboratory

Computational exercises for water resources analysis, field trips demonstrating hydrologic monitoring systems and complex regional water management systems. Corequisite: CENG 140. (1 unit)

141. Fluid Mechanics and Hydraulic Engineering

Fundamentals of fluid behavior with an emphasis on water. Covers basic fluid properties, flow classification, and fluid statics including forces on submerged surfaces. Introduces and applies fundamental relationships: conservation of mass, momentum, and energy. Hydraulic applications include flow in pipes and pipe networks, steady flow in open channels, and hydraulic machinery. Prerequisites: CENG 41, PHYS 31. Corequisite: CENG 141L. (4 units)

141L. Fluid Mechanics and Hydraulic Engineering Laboratory

Experiments demonstrating the principles of fluid flow and hydraulics for flow in pipes and in open channels. Use of modern data acquisition and writing of formal lab reports. Corequisite: CENG 141. (1 unit)

142. Water Resources Design

Design of system components for water supply and flood control projects including storage facilities, closed conduits, open channels, well fields, and pumping systems. Also listed as CENG 242. Prerequisites: CENG 141 and CENG 140 (CENG 140 may be taken concurrently) or permission of instructor. (4 units)

143. Environmental Engineering

Water and air quality. Water supply and pollution control; air pollution control. Management of solid wastes. Prerequisites: CHEM 11 or CHEM 11T, MATH 12, and junior standing. Corequisite: CENG 143L. (3 units)

143L. Environmental Engineering Laboratory

Laboratory analysis of aqueous samples and ideal reactor systems. Analysis of non-point pollution prevention strategies. Solid waste characterization. Corequisite: CENG 143. (1 unit)

144. Water and Wastewater Treatment

Design of water and municipal wastewater treatment systems. Topics include unit operations such as flocculation, sedimentation, filtration, biological treatment, nutrient removal, disinfection, and sludge management.. Also listed as CENG 254. Prerequisites: CENG 143 or instructor's consent. Corequisite: CENG 144L. (3 units)

144L. Water and Wastewater Treatment Laboratory

Laboratory experiments to characterize water samples, including BOD and COD measurements. Field trips to local water and wastewater treatment plants. Also listed as CENG 254L. Corequisite: CENG 144. (1 unit)

145. Transportation Engineering Design

Transportation systems analysis. Dynamics and traffic flow. Highway geometric design, traffic control, transportation planning. Transportation policies and economics. Prerequisites: CENG 10 and junior standing. (4 units)

146. Design of Cold-Formed Steel Frame Structures

Introduction to cold-formed steel design and construction. Practical design of members for tension, compression, shear, and torsion. Connection detailing. Lateral force-resisting systems. Also listed as CENG 246. Prerequisite: CENG 132. (4 units)

147. Pavement Design

Paving materials. Geometric and structural design of highways. Urban street layout and details. Layout and design of airport runways. Also listed as CENG 247. Prerequisites: CENG 115, 121A and 121B. (4 units)

148. Structural Systems

Structural requirements for building systems. Design loads, load combinations, and load path. Fire, sound, thermal, and mechanical requirements. An introduction to design of steel and reinforced concrete beams and columns. Prerequisite: CENG 132. Corequisite: CENG 148L. (4 units)

148L. Structural Systems Laboratory

Modeling, analysis, and evaluation of building structures. Structural drawings/schematics. Corequisite: CENG 148. (1 unit)

149. Civil Systems Engineering

Introduction to engineering systems analysis and management technologies and their applications to civil engineering problems such as transportation, assignment, critical path, and maximum flow problems. Topics include linear programming, nonlinear programming, probability, and queuing theory, as well as relevant applications to civil engineering problems. Also listed as CENG 249. Prerequisites: MATH 13 and junior standing. (4 units)

150. Traffic Engineering: Design and Operations

Basic characteristics of motor vehicle traffic flow, highway capacity analysis, traffic control devices, traffic data studies and signal design, and traffic safety. Also listed as CENG 250. Prerequisite: CENG 145. (4 units)

151. Special Topics in Transportation Engineering

Coverage of special topics in transportation engineering including travel demand forecasting, analysis and application, static and dynamic traffic analysis and modeling for short-term and long-term planning and optimization. Also listed as CENG 251. Prerequisite: CENG 145. (4 units)

160. GIS in Water Resources

Introduction to Geographical Information Systems (GIS) technology with applications in watershed analysis, interpolation, site suitability assessment, and spatial analysis of environmental data. Obtaining and processing digital information at different scales for state-wide, watershed, and urban areas and combination of location information with tabular information such as census data. Commercial and open-source software are used. Also listed as CENG 260. Prerequisites: junior standing and experience with Windows directory and file management, or permission of instructor. (3 units)

161. Sustainable Water Resources

Analysis and design of water resource systems, from flood control projects to drinking water supply, as environmental constraints and societal values shift. Quantitative analysis of environmental data is used to detect changes and project future conditions. Includes sustainable and low-impact design techniques, climate change impacts on water, assessing sustainability, life-cycle economics, and current topics. Also listed as CENG 261. Prerequisite: CENG 140 or permission of instructor. (3 units)

162. Computational Water Resources

Use of professional application software to analyze systems for water resources engineering projects. Computational tools include the development of a computer model to translate rainfall into runoff for a river basin, and assess the impacts of climate variability and change on water supply. Also listed as CENG 262. Prerequisites: CENG 140, which may be taken concurrently, or equivalent. (3 units)

163. Solid and Hazardous Waste Management

Characterization of solid waste streams. Overview of collection, transport, processing, and disposal options. Waste stream reduction and resource recovery strategies. Also listed as CENG 263. (4 units)

182. Introduction to Building Information Modeling (BIM)

Parametric design and modeling, BIM-based scheduling and estimating, model checking and validation, 4D visualization, green building design, applications in integrated project delivery and facilities management, interoperability, standardization, and web-based collaboration. Also listed as CENG 282. Prerequisites: CENG 125 and junior standing. (3 units)

183. Building Systems

Introduction to the major systems within a building, including heating, ventilation, air conditioning, electrical, energy, life safety, and plumbing. The engineering, construction, and sustainability aspects of each system will be introduced. Also listed as CENG 283. Prerequisite: Junior standing. (3 units)

184. Construction Project Delivery

Project organization and delivery systems, Project stakeholders authorities and responsibilities, contractual payment schemes, bidding process, preconstruction administration, contracts, payment measurement, change orders, quality management, safety, claims and disputes, risk and liability sharing, project documentation and closeout, lean construction, pull planning, work structuring, lean supply chain, lean project delivery system. Also listed as CENG 284. Prerequisite: Junior standing. (3 units)

185. Cost Estimation

Types of construction cost estimates and their uses. Direct and indirect costs. Cost budgeting and control. Quantity Takeoff. Cost databases and software. Detailed cost estimates of main building systems. Also listed as CENG 285. Prerequisites: CENG 118. (3 units)

186. Construction Planning and Control

Work breakdown structure, work sequencing and logic, activity duration estimates, schedule network representations, critical path method, stochastic scheduling, resources loading, resource allocation, time-cost tradeoffs, and project cash flow analysis. Planning of repetitive tasks, and time-cost control. Use of commercial scheduling software. Group project on construction planning. Also listed as CENG 286. Prerequisite: CENG 118. (3 units)

187. Heavy Construction

Earthmoving with dozers, scrapers, and excavators; hauling, compacting, concrete operations, asphalt paving, work and production plans. Machine power and resistance, piling, cranes, and rigging operations. Also listed as CENG 287. Prerequisite: junior standing. (3 units)

188. Co-op Education

Practical experience in a planned program designed to give students practical work experience related to their academic field of study and career objectives. Satisfactory completion of the work assignment includes preparation of a summary report on co-op activities. P/NP grading. May not be taken for graduate credit. (1--2 units)

189. Co-op Technical Report

Technical report on a specific activity such as a design or research project, etc., completed during a co-op assignment. Approval of department advisor required. Letter grade based on content and quality of report. May not be taken for graduate credit. Prerequisite: CENG 188. (2 units)

192A. Civil Engineering Project Development

Introduction to problem-solving methodology for the design of civil engineering systems and components. Selection of Capstone Design Project, definition of problem, and conceptual design. Prerequisite: Junior standing. (1 unit)

192B. Elements of Civil Engineering Practice

Further development of problem-solving methodology; introduction to project management. Applications of engineering techniques and procedures to civil engineering design. Schematic designs, alternatives analysis and cost estimates. Preliminary design of critical components or subsystems of Capstone Design Project. Environmental impact assessment. Prerequisite: CENG 192A. Corequisite: CENG 192C. (2 units)

192C. Professional Development Seminar

Importance of licensing and lifelong learning in the practice of civil engineering. Advanced workshops on topics relevant to Capstone Design Projects. Review of topics covered on the Fundamentals of Engineering (FE) exam. Corequisite: 192B. (1 unit)

193. Detailed Project Design

Investigation of an approved Capstone Design Project. The design process, including problem formulation, analysis, preliminary design, final design, and plans, is completed. Formal presentation of preliminary and final designs. Prerequisite: CENG 192B. (4 units)

194. Design Project Communication

Completion of design project documentation and public presentation of results. Prerequisite: CENG 193. (1 unit)

197. Special Topics in Civil Engineering

Subjects of current interest. May be taken more than once if topics differ. (1--4 units)

198. Internship

Time off campus with an engineering organization. Different aspects of work in the assigned professional office. Oral and written reports. Prerequisites: Senior standing and approval of internship coordinator. (4--5 units)

199. Directed Research

Investigation of an approved engineering problem and preparation of a suitable project report. Conferences with faculty advisor are required. Prerequisite: Junior standing. (1--5 units)